The Contamination of Dirty Bomb Case Study Example | Topics and Well Written Essays - 500 words

The Contamination of Dirty Bomb - Case Study Example The presence of low-level nuclear materials cannot be disputed. The places where low-level nuclear materials are produced are everywhere in the world, and that means that the materials are found everywhere. Â  After a dirty bomb has exploded, it is necessary to clean up and decontaminate the affected area. All the materials in the place which have been contaminated should be removed from the place of explosion. When a dirty bomb explodes, there are procedures to be followed to decontaminate and clean up the place. Masks should be provided to rescuers to protect them from inhaling dust and other particulates. The relevant authority should observe and monitor the area for possible hazards. There should be equipment in operation to evaluate the oxygen levels, toxic gasses, and flammable gasses. Once the rescue team gets to the point of explosion, they should remove all exploded materials especially cars as these are assumed to be dirty. The personnel should determine the extent area with toxics and should immediately start to evacuate people to safe places. Â  Large uninjured populations should evacuate themselves. The personnel should provide safe exit routes in conjunction with building managers. The victims should be screened for dose rate, and establish those that need decontamination. The victims should avoid eating or drinking but should go and shower with water and soap. The structures and cars contaminated should not be decontaminated during the initial response process. The contaminated water should be allowed to flow into the drainage systems of the municipal. If possible, the water should be redirected to other channels. The people needing immediate attention should be separated from seriously injured people (Benjamin, 2011). These people should be examined for physical contamination and evacuated.